X9C103 Digitally Controlled Potentiometer
৳ 180.00
10K Ohm Digitally Controlled Potentiometer 8P-DIP.
The X9C102, X9C103, X9C104, X9C503 are Intersils’ digitally controlled (XDCP) potentiometers. The device consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interfacce. The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The position of the wiper can be stored in non-volatile memory and then be recalled upon a subsequent power-up operation.The device can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications ranging from control to signal processing to parameter adjustment.
Features
- Solid-State Potentiometer
- Three-Wire Serial Interface
- 100 Wiper Tap Points
- Wiper Position Stored in Non-volatile Memory and Recalled on Power-up
- 99 Resistive Elements
- Temperature Compensated
- End-to-End Resistance, ±20%
- Terminal Voltages, ±5V
- Low Power CMOS
- VCC = 5V
- Active Current, 3mA max.
- Standby Current, 750µA max.
- High Reliability
Endurance, 100,000 Data Changes per Bit
Register Data Retention, 100 years
- X9C102 = 1kΩ
- X9C103 = 10kΩ
- X9C104 = 100kΩ
Package Included:
- 1pc * X9C103 Digitally Controlled Potentiometer
Related Product

HELP: 0123110110
09.00am - 08.00pm (7 days a week)

PAY CASH ON DELIVERY
Pay cash at your doorstep

SERVICE
All over Bangladesh

WARRANTY AND REPLACEMENT
Up to 1 Year
Reviews
There are no reviews yet.