TXS0102 2Bit Bidirectional Voltage Level Converter

This is a 2-Bit Bidirectional Voltage Level Translator I2C IIC Level Module CJMCU-0102 TXS0102.This two-bit non-inverting translator can be used to provide digital switching compatibility between mixed-voltage systems because it is a bidirectional voltage-level translator. The device uses two independent, programmable power supply rails, with the A ports supporting operating voltages between 1.65 V and 3.6 V while tracking the VCCA Supply and the B ports supporting operating voltages between 2.3 V and 5.5 V while tracking the VCCB Supply.

This device supports both lower and higher logic signal levels and offers bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. All I/Os are put into a high-impedance condition when the output-enable (OE) input is low, which considerably lowers the power-supply quiescent current usage.

Specifications:

1. This two-bit non-inverting converter is a bi-directional voltage level converter that can be used to establish digital switching compatibility between mixed voltage systems.
2. It uses two independent, configurable power rails. Port A supports 1.65 V to 3.6 V operating voltage while tracking the VCCA supply;
3. Port B supports operating voltages from 2.3 V to 5.5 V while tracking the VCCB supply.
4. This supports both lower and higher logic signal levels and provides bidirectional switching between the 1.8 V, 2.5 V, 3.3 V, and 5 V voltage nodes.
5. When the output enable (OE) input is low, all I/Os are in a high-impedance state, which greatly reduces power supply quiescent current consumption.
6. To ensure a high impedance state during power-up or power-down, OE should be connected to GND via a pull-down resistor; the minimum value of the resistor depends on the current source capability of the driver.

Note:

1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-2cm measuring deviation due to manual measurement.

Packing List:

1Pc * TXS0102 2Bit Bidirectional Voltage Level Converter