SW18010P Vibration Sensor Switch

• 1.SW-18010P series are spring type, no directional vibration sensor trigger switch, any angle can trigger
• 2.Switch is open circuit OFF-state , when it is static, when external force to touch and corresponding vibration, or movement speed achieve adequate (partial) centrifugal force, conductive pick feet will produce instant conductivity is instant ON-state, when external force disappear, switch back to open circuit OFF-state.
• 3.Switch have the identification P at the bottom, for completely airtight;
• 4.In the normal, switch life can reach 20,0000 cycles lifespan
• 5.This series Switches have trigger high sensitivity
• 6.Apply to security devicestoys electronic scales products

• Voltage: <12V
• Current: <20mA
• Conductive time: 2ms
• Closed resistance: <30 ohm
• Open resistance: >10M ohm
• Mechanical characteristics:
• Temperature range: Storage: -40°C to 80°C, Operating: -40°C to 80°C
• Pull force of terminal: 500gf for 1 minute
• Humidity: 95% RH, 40°C for 96 hours
• Operating lifespan: 100,000 cycles
• Bill of material: Tube: ABS777D
• Guide pin: brass tube, gold-plated
• Spring: Stainless steel / Phosphorus copper wire
• Sealing glue: Epoxy resin
• Heat shrinkable tube: PET, black/gray
• Welding characteristics
• Solder tin, tin content 100%
• Welding humidity: 260°C ±10°C
• Welding time: 2-2.5 seconds
• Do not use strong acid alkali flux

• 1.If the product used for high security products and durability of extremely high equipment (such as life safety equipment, aviation facilities, disaster prevention device), please confirm whether a share, can seek advice our company for details
• 2.In case of fire, Please do not overload applicable,
• 3.The welding temperature or time more than standard, can cause switch collapse
• 4.Do not use water solubility flux. May cause damage to the switch
• 5.Do not use solvent wash switch
• 6.This switch conduction rate of 98% (conductivity rate per 100 times value switch actions, can good conduction ratio)

Packaging: