PICKIT2 PIC Kit 2 Programmer

PICKIT2 PIC Kit 2 Programmer

The PICkit2® programmer/debugger is a simple low-cost online debugger controlled by a PC running MPLAB IDE (v8.20 or higher) software on a Windows® platform.

1. USB (Full speed 12 Mbits/s interface to host PC)
2. Real-time execution
3. MPLAB IDE compatible (free copy included)
4. Built-in over-voltage/short circuit monitor
5. Firmware upgradeable from PC/web download
6. Totally enclosed
7. Supports low voltage to 2.0 volts (2.0v to 6.0v range)
8. Diagnostic LEDs (power, busy, error)
9. Read/write program and data memory of microcontroller
10. Erase of program memory space with verification
11. Freeze-peripherals at breakpoint
12. Program up to 512K byte flash with the Programmer-to-Go
13. Support windows 7 system

1. USB (the highest speed in the Pc interface is 12 Mbits / s)
2. Real-time execution
3. MPLAB IDE compatible
4. Built-in high voltage / short circuit monitor
5. Fully Closed Case
6. PC / Web Upgradeable Hardware Software
7. Definition Leds (Power, busy, error)
8. Microcontroller’s data memory and program write / read
9. Deleting the Memory Area of the Program with Verification
10. Cutting Point Peripherable Peripherals
11. With the ‘Programmer to go’ feature, you can put the “hex” code pre-loaded into your memory without your computer.
12. Including ICSP cable