MD13S DC6V-30V 13Amp Motor Driver

1. DC Brush motor (Two Terminals)
2. Operating voltage from 6V to 30V
3. Rated Current <= 13A
4. Peak Current <= 30A

Example of suitable DC brush motor with MD13S (Not limit to):

• SPG50 series

• SPG30 and SPG30E series

• IG45 series

• IG42 series

• IG32 series

• DKM 40W series

1. Bi-directional control for 1 brushed DC motor
2. Support motor voltage from  6V to 30VDC
3. Maximum current up to 13A continuous and 30A peak (10 seconds)
4. GROVE compatible
5. 3.3V and 5V logic level input.
6. Solid state components provide faster response time and eliminate the wear and tear of mechanical relay
7. Fully NMOS H-Bridge for better efficiency and no heat sink is required
8. Regenerative Braking
9. Speed control PWM frequency up to 20KHz (Actual output frequency is same as input frequency)
10. Support both locked-antiphase and sign-magnitude PWM operation, *NOT RC (Radio Control) PWM
11. SMD compatible
12. RoHS, FCC and CE compliance
13. Dimension: 61mm x 33mm

• User’s Manual
• Arduino Library with Example (Github)
• Controlling MD10C with Arduino, just follow the connection and code, MD10C and MD13S is compatible
• MD13S Footprint Eagle library
• Fritzing file
• RoHS Certificate
• FCC Certificate
• CE Certificate
• Plant cultivation temperature adjustment kit ITBOX, uses MD13S to control peltier, by Japanese user

• 1 x MD13S motor driver board
• 1 x Green + Black 2-way terminal blocks (Normally Black is for Motor, Green is for Power)
• 1 x Grove connector (Grove to Grove)