K Type Thermocouple Sensor Probe 1024°

This K Type Thermocouple Sensor Measure 1024°C Temperature sensor makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) for giving an accurate temperature compensated measurement of the supplied K-Type thermocouple sensor.

It has a 12-bit resolution providing temperature readings from 0°C to 1024°C (max temperature of the supplied sensor is 450°C) with a resolution of 0.25°C.

Screw terminals allow for connection to the thermocouples spade connectors and a 5 pin standard 0.1″ header provides an interface to a microcontroller such as an Arduino development board.

Supplied thermocouple sensor has a diameter of 4.5mm with a 6mm threaded mounting bolt. The total length of the sensor including cable and spade connectors is ~100cm.

Features :

1. Internal integrated cold junction compensation circuit;
2. Temperature signal can be converted into 12-bit digital
3. Embedded thermocouple break detection circuitry.
4. K-type temperature probe
5. Simple SPI serial output temperature.
6. High impedance differential inputs.
7. Thermocouple break detection.
8. 2000V of ESD signal.

Connect your Arduino to the Thermocouple Module:

• Pretty simple stuff.   Keep the note about the thermocouple polarity in mind as you make these connections.

Package Included:

• 1pc * K Type Thermocouple Sensor Probe 1024°