EGS002 Pure Sine Wave Inverter Board With LCD

The EGS002 is a board unit designed for single-phase pure sine wave inverters. Using a single-phase pure sine wave inverter dedicated chip EG8010 as the control chip, the IR2110S driver chip. Driver voltage circuit board, current, temperature protection, LED alarm display and fan control functions, and can be set by jumper 50/60 hz output, soft-start function and dead zone size. EGS002 is an improved version of the EGS001 EGS001 interface that is compatible with the original. The EGS002 adds the locking function unit level to the original circuit, greatly increasing the board’s anti-jamming capability. And increased the LCD display interface, easy to use display chip.

The EG8010 is a digital, fully functional, fully-sine wave inverter with dead-band control for DC-DC-AC two-stage power conversion architecture or DC-AC single-stage power supply transformer conversion impulse Architecture, 12 mhz crystal external oscillator, can achieve high accuracy, distortion and harmonics are very small 50 hz or 60 hz pure sine wave inverter ASIC. The chip uses CMOS technology, SPWM sine integrated internal generator, dead time control circuit, amplitude multiplier factor, soft-start circuit, protection circuit, RS232 serial communication interface and serial 12832 LCD driver module and other functions .

Circuit diagram

Pins and jumpers:

Pin description

Jumper Settings

Features:

1. – 5V single power supply
2. – Pin set up four kinds of pure sine wave output frequency: fixed frequency 50 hz pure sine wave; 60 hz fixed frequency pure sine wave; 0-100 hz pure sine wave frequency is adjustable; 0-400 hz pure sine wave frequency is adjustable.
3. – Unipolar and bipolar modulation
4. – Comes with deadband control, pin set up 4 dead time: 300nS dead time; 500nS dead time ; 1.0uS dead time ; 1.5uS dead time
5. – External 12MHz crystal oscillator
6. – PWM carrier frequency 23.4KHz
7. – Voltage, current, real time temperature feedback
8. – Overvoltage, undervoltage, overcurrent and overheating protection
9. – Soft-start mode pin setting the response time of 1S
10. – Serial communication to set the output voltage, frequency and other parameters External
11. – External serial port 128 * 32 LCD module 1602 display the voltage, frequency, temperature and electric current of the inverter and other information;

Applications:

• – Single phase pure sine wave inverter
• – PV Inverter
• – Wind power inverter
• – Uninterruptible Power Supply UPS System
• – Digital generator system
• – IF power
• – Single-phase motor speed controller
• – Single-phase inverter
• – Sine wave dimmer
• – Sine wave regulator
• – Sine wave generator

Notice: LCD does not contain cable

In the use of the LCD,Connection EGS002 driver board and LCD cable must use shielded cable, otherwise. Inverter, high-voltage high-current environment will seriously interfere with the operation of the drive plate

Package Included:

• 1pc x EGS002 Pure Sine Wave Inverter Board
• 1pcx EGS002 Pure Sine Wave Inverter LCD Display