DC24V 4 Channel Red Color Relay Module

This module uses genuine quality relay, normally open interfaces , Maximum load AC 250V/10A, DC 30V/10A. Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA. Fault-tolerant design, even if the control line is broken, the relay will not move.

The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient. The Module can be set by jumper high or low trigger.

Features:

1. 1. NO¡± Pin Maximum load: AC 250V/10A, DC 30V/10A
   2. Using SMD OPTOCOUPLER isolation, the trigger current only 5mA
   3. The module have 5V, 12V and 24V are available
   4. The module can be set to high or low triggered by jumper
   5. Fault-tolerant design, even if the control line is broken, the relay will maintain;
   6. Has the power indicator (green) and relay status indicator (red)
   7. Size: 50*26*18.5mm
   8. Has four mounting bolts holes, hole 3.1mm, 44.5*20.5mm pitch

Specifications:

Relay Model: SRD-24VDC-SL-C
Switching Capacity: 10A
Maximum Voltage: AC250V / DC30V
Connects directly to a microcontroller
LED Indicator for each channel
Material: Metal+ Plastic
Color: As pictures show
Size: Approx. 72x 55x 19mm(Lx Wx H): 2.83x 2.17x 0.75inch

Interface Input:

1. VCC: Relay power supply +
2. GND: Relay power supply –
3. IN: Signal trigger input (High or Low Level Signal, select via jumper)

Interface Output:

1. NO: Relay normally open.
2. COM: Relay Common Pin
3. NC: Relay normally closed.
4. High or Low Level Trigger Select:
5. 1. Use High Level Trigger
6. When ¡°IN¡± input High Level Signal, the ¡°NO¡± connect with ¡±COM¡±
7. When ¡°IN¡± input Low Level Signal, the ¡°NC¡± connect with ¡°COM¡±
8. 2. Use Low Level Trigger

Packing List:

1Pc * DC24V 4 Channel Red Color Relay Module