SN74HC374D Edge-Triggered Octal Flip-Flop Logic IC

The SN74HC374D, SN74HCT374D, HC374D are an octal positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs IC SOP-20P Package. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition.

A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs also include clamp diodes, this enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Features:

1. Wide supply voltage range from 2.0 to 6.0 V
2. CMOS low power dissipation
3. High noise immunity
4. Input levels:
5. For 74HC374: CMOS level
6. For 74HCT374: TTL level
7. Octal bus interface
8. Non-inverting 3-state outputs
9. 8-bit positive, edge-triggered register
10. Common 3-state output enable input
11. Independent register and 3-state buffer operation
12. Complies with JEDEC standards
13. JESD8C (2.7 V to 3.6 V)
14. JESD7A (2.0 V to 6.0 V)
15. Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
16. ESD protection:
17. HBM JESD22-A114F exceeds 2000 V
18. MM JESD22-A115-A exceeds 200 V
19. Specified from -40 °C to +85 °C and -40 °C to +125 °C

Packing List:

1Pc * 74HC374D Edge-triggered Octal Type Flip-Flop IC’s