Home » Shop » ADXL335 3 Axis Accelerometer Module

ADXL335 3 Axis Accelerometer Module

৳ 600.00

You must select your brand attribute in Theme Settings -> Shop -> Brands

The GY-61 ADXL335 ADXL-335 Accelerometer 3-Axis 5 Pin Analog Output Module Angular Transducer 3V/5V For Arduino Angular Sensor Tilt Angle Board Triaxial Gravity Acceleration

Categories: ,
The GY-61, ADXL335, ADXL-335 Accelerometer 3-Axis 5 Pin Analog Output Module Angular Transducer 3V 5V For Arduino Angular Sensor Tilt Angle Board Electrical Circuitry & Parts. We have updated our favorite triple-axis accelerometer to now have an onboard 3.3V regulator – making it a perfect choice for interfacing with a 5V microcontroller such as the Arduino. This breakout comes with 3 analogue outputs for X, Y and Z axis measurements on a 0.75″x0.75″ breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for its exceptional quality MEMS devices. The VCC takes up to 5V in and regulates it to 3.3V with an output pin.
The analogue outputs are ratio metric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between. Fully assembled and tested. Comes with  8-pin 0.1″ standard header in case you want to use it with a breadboard or perf board. Two 2mm (0.08″) mounting holes for easy attachment. The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth.
  1. Onboard LDO Voltage regulator
  2. Can be interfaced with 3V3 or 5V Microcontroller.
  3. All necessary components are populated.
  4. Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
  5. Tap/Double Tap Detection
  6. Free-Fall Detection
  7. Analog output
  8. Build in ultra-low noise linear LDO voltage regulator
  9. Built-in onboard filters, which reduce noise from the motor and other high-current electronics
  10. All sensors connected to the I2C bus
  11. You can easily select two I2C addresses for MPU6050 by soldered jumper
  12. Power LED
  13. Build in Logic level converter for I2C
  14. Designed for 5V logic level
  1. Name: ADXL335 module (triaxial accelerometer analogue output)
  2. Model: GY-61
  3. Supply Range: 3V – 5V DC
  4. Full-scale range: +/- 3g
  5. Current: 400uA
  6. 5 Pin
  7. Output: Analog (X, Y, Z outputs)
  8. Sensitivity: 300mV/g (Typ)
  9. Operating Temperature: -40°C  ~ 85°C
  10. Dimensions: 15.7mm x 20.3mm x 11.6mm (L * W * H)
  1. FPV, RC and Robots systems
  2. GPS navigation systems
  3. Impact recognition and logging
  4. Gaming and virtual reality input devices
  5. Motion-activated functions
  6. Intelligent power saving for handheld devices
  7. Vibration monitoring and compensation
  8. Free-fall detection
  9. 6D-orientation detection
Packing List:
1Pc * ADXL335 3 Axis Accelerometer Module


There are no reviews yet.

Be the first to review “ADXL335 3 Axis Accelerometer Module”

Your email address will not be published. Required fields are marked *

HELP: 0123110110

09.00am - 08.00pm (7 days a week)


Pay cash at your doorstep


All over Bangladesh


Up to 1 Year